Sigicom INFRA D10 User Manual

Copyright © Sigicom AB 2020 44
Appendix A. Battery Level Limits
Monitoring is stopped, and the system turns off automatically if the
battery state of charge falls to the BAT EMPTY level. For automatic
restart of monitoring, a higher level or external power is needed.
The reason for this shut-down mechanism is to prevent data loss and to
protect the batteries from permanent damage.
The relation between battery voltage and State-of-charge (SOC) for D10
is:
And for D10 Micro:
The battery symbol in the display has different colors, which vary
according to:
Falling voltage: SOC Display symbol
BAT FULL => BAT NORMAL 95% green scale
Voltage SOC
16.6 V 100%
13.8 V 15%
13.2 V 5 %
12.6 V 0%
Voltage SOC
12.7 V 100%
11.3 V 15%
11.1 V 5 %
10.9 V 0%

Sigicom INFRA D10 Specifications

General

Brand	Sigicom
Model	INFRA D10
Category	Data Loggers
Language	English