Sigicom INFRA D10 User Manual

Copyright © Sigicom AB 2020 51
Appendix E. Errors and Warnings
The table below lists some of the errors and warnings:
Code
Error/warning text
Comment/tip
E10
Battery level low
Charge the battery
E11
Battery level critical
Charge the battery
E12
Battery level empty
Charge the battery
E14
Battery imbalance
No problem, will balance out.
E16
Battery temperature high
Contact Sigicom Support
E18
Battery is missing
Check that both batteries are
installed
E19
Backup battery low
Contact Sigicom Support
E81
Monitoring started automatically
After instrument reboot
E90
Real-time clock not synchronized
Check instrument clock
E91
Real-time clock poorly
synchronized
Check instrument clock and set
if it differs two seconds or more.
E102
Instrument humidity warning
Check that all screws of the
instrument lid are tightened
E110
File system failure
Check the memory card
E145
Node lost
This error can be triggered only
when monitoring is on. Connect
all sensor and restart D10.
E146
Incomplete config
Contact Sigicom support

Sigicom INFRA D10 Specifications

General

Brand	Sigicom
Model	INFRA D10
Category	Data Loggers
Language	English