SIGLENT TECHNOLOGIES SDG1062X User Manual

SIGLENT
SDG1000X User Manual 33
2. Input the desired stdev.
Use the numeric keyboard to input the parameter value directly, and press the
corresponding key to select the parameter unit. Or use the arrow keys to
select the digit to edit, and then use the knob to change its value.
Figure 2-14 Setting the Stdev
To Set the Mean
1. Press Waveforms → Noise → Mean, to set the mean.
The mean shown on the screen when the instrument is powered on is the
default value or the set value of last power down.
2. Input the desired mean.
Use the numeric keyboard to input the parameter value directly, and press the
corresponding key to select the parameter unit. Or use the arrow keys to
select the digit to edit, and then use the knob to change its value.

SIGLENT TECHNOLOGIES SDG1062X Specifications

General

Brand	SIGLENT TECHNOLOGIES
Model	SDG1062X
Category	Portable Generator
Language	English