SIGLENT TECHNOLOGIES SDG1062X User Manual

SIGLENT
SDG1000X User Manual 79
device connected.‖, as shown in Figure 2-41. After removing the U-Disk, the
screen will display a prompt message ―USB device removed.‖ And ―USB
Device (0:)‖ in the storage menu will disappear.
Figure 2-41 Storage System
Note:
The SDG1000X can only identify files of which filenames consist of English
letters, number and underscore. If other characters are used, the name may
be displayed in the store and recall interface abnormally.
Browse
 Use the knob to shift between the directories to choose Local (C:) or USB
Device (0:). Choose Browse, press the knob to open the current directory.
 Use the knob to switch between folder and files under the current directory.
Choose Browse, press the knob to open the subdirectory. Choose <up>,
then choose Brower or press the knob to return to the upper level
directory.
2.12.2 File Type
Choose Store/Recall → File Type to select the desired file type. Available file
types are State File and Data File.

SIGLENT TECHNOLOGIES SDG1062X Specifications

General

Brand	SIGLENT TECHNOLOGIES
Model	SDG1062X
Category	Portable Generator
Language	English