SIGLENT TECHNOLOGIES SDG1062X User Manual

SIGLENT
70 SDG1000X User Manual
from the [Aux In/Out] connector at the rear panel when external trigger is
selected. A sweep will be generated once the connector receives a CMOS
pulse with specified polarity. To set the CMOS pulse polarity, choose Edge to
select ―Up‖ or ―Down‖.
3. Manual Trigger
Choose Source → Manual, a sweep will be generated from the corresponding
channel when the Trigger softkey is pressed when manual trigger is selected.
Choose Trig Out → On, the [Aux In/Out] connector at the rear panel will output
the trigger signal.

SIGLENT TECHNOLOGIES SDG1062X Specifications

General

Brand	SIGLENT TECHNOLOGIES
Model	SDG1062X
Category	Portable Generator
Language	English