Need help?Do you have a question about the SIGLENT STB3 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Output Current Range | 0 to 3 A |
| Display | LCD |
| Communication Interface | USB |
| Power Supply | 100 V to 240 V |
Details various standard waveform types generated by the STB3 demo board.
Configuration and display of sine wave signals with different frequencies and amplitudes.
Configuration and display of square wave signals at various frequencies and amplitudes.
Details the I2C communication protocol, including speed, addressing, and frame structure.
Description of SPI communication protocol, including speed, data width, and chip select.
Details UART communication, including baud rate, data bits, parity, and stop bits.
To Next Page