Figure 30 SPO –Intensity-Graded Display
Figure 31 SPO – Display with Color Mode Enabled
Serial Protocol
I2C
100 kbps
7-bit and 10-bit addressing
Read and write (R/W)
The I2C signal has 4 different kinds of frames (see table below). Every
frame has 12 bytes of data which is
96'h53_49_47_4C_45_4E_54_5F_XX_XX_XX_XX（SIGLENT_XXXX in ASCII format,
XXXX stands for 4 random characters）. If you have trouble in understanding the table below,
please refer to NXP document UM10204.
15 STB3 User Manual
To Next Page
Loading...