26
5
PC mode
PC mode enables you to connect the RC MOVE to SIGMA DATA CENTER using
the SIGMA wireless dongle.
SIGMA DATA CENTER is software for evaluating training data and statistics from
SIGMA bike computers and sports watches.
Access PC mode as follows.
Press TOGGLE+/- to navigate to “PC mode” in the
training selection menu and then press ENTER.
The RC MOVE is now ready to connect to your PC.
6
Accessing the memory
Access the menu item “Memory” as described in
section 1.
You can access the saved training data. This is sorted
by date/chronologically, with the most recently stored
training session displayed first. You can view the
more detailed data by pressing ENTER in line with the
navigation principle described in section 1.
Training sessions recorded with the SIGMA MOVE app
cannot be seen in the watch’s memory.
Maximum recording period: 260 hours
Select a training session by date.
Press TOGGLE+/- to navigate to the desired training
date and then confirm by pressing ENTER.
You can now view various values (general, laps,
target zone, intensity zone, and the applicable values).
To Next Page
Loading...
