E2 / D2 Measuring mode and operation of the Functions
Technical changes reserved - 41 -
Filter setting (damping):
The menu item ")L/W" is used to dampen the display.
ª Keep pressing the MENU button until the menu item ")L/W " appears.
¾ ")L/W " appears and right of it the current value (
).
Value selection: … ( = no damping).
ª Select the desired value with the MENU button and save your se-
lection with the OK button.
¾ The selection is saved and the device switches back to measuring
mode.
Displaying the serial number:
The menu item shows the serial number and the software version of the device. You need this
information for questions if servicing work is required.
Furthermore, you can use this item to exit the "Menu for device settings" without making any
changes.
ª Keep pressing the MENU button until the menu item appears.
¾ The serial number and the software version appear:
1st line: Displays the serial number.
2nd line: Displays the software version.
ª Press the MENU button to stay in the "Menu for device settings".
or
ª Press the OK button to return to the measuring mode.
To Next Page
Loading...
Need help?
General
