Compact - Laser Series CL plus Instructions for use
6 Cleaning and maintenance
To avoid any danger of infection, the laser point must be disinfected
before and after each treatment (and the power-reducing-tip and the bent
light conductor).
The laser can be cleaned carefully with a cloth moistened with alcohol or
surgical disinfection. No liquid should be allowed to enter the openings.
The laser point itself can be cleaned with a pad or cloth moistened with
alcohol.
The drill of the “power-reducing-tip“ can be cleaned with a toothpick and
thereafter be washed with alcohol. For this, the power-reducing-tip must be pulled
out of the laser always.
The "bent light conductor" can be cleaned like the laser top. The rear
surface is well protected with a black hull made out of synthetic material. If this
surface does get soiled the hull must be taken off. The lighting cable can then be
proceeded to be cleaned, see laser-point. Ensuing which the hull must remain
attached to the lighting cable again, in such a way that the lighting cable just
touches the front-surface of the laser point after the hull is pulled up, whereby the
hull has to loom until the end of the cylindrical area of the laser point.
Direction to p ut o n
Direction of th e
Las er B eam
Light condu cto r, bent
Cleaning of the Laser storage:
As this storage is made from acrylic it must be cleaned with lukewarm water with
some dishwashing or soap added. Take the best with a soft cloth or with the water
sucked sponge.
Regard! Do not use disinfectants, abrasive cleaners, glass cleaners or cleaners
containing alcohol, because they attack the material! As a result, the formation of
hairline cracks and breaks the clipboard!
There is no additional maintainance necessary by the user.
7 Waste management of laser and accessory
For waste management please regard the valid legal regulations of each
country/region!
Disposal of the device: Not like household waste, but in the nearest
receiving depot for disposal of electric devices!
The batteries have to be brought to the next receiving depot for
special waste disposal.