Need help?Do you have a question about the Silva s15 and is the answer not in the manual?
General| Receiver Sensitivity | 0.25 μV (12dB SINAD) |
|---|---|
| Channel Spacing | 25 kHz |
| Modulation | FM |
| Current Consumption | 1.5A (max) |
| Frequency Range | 400-470MHz |
| Output Power | 5W |
Explains the function of each button and key on the front panel of the S15.
Describes the various connectors and sockets found on the back of the S15 unit.
Explains the various symbols and indicators displayed on the S15's Liquid Crystal Display (LCD).
Explains how to use the telephone-style keypad for entering data and characters.
Details the functions of the ENTER, CLEAR, UP/DOWN, PTT, and CALL keys on the microphone.
Explains the dual watch function for scanning between selected and priority channels.
Details the full scan function for scanning through channels sequentially until a signal is detected.
Explains memory scan, which scans only channels entered into the scan memory.
Details how to select high or low RF output power for the transceiver.
Explains how to adjust the receiver muting threshold (squelch) level.
Details how to adjust the volume level using the volume control screen and keys.
Explains how to automatically select channel 16 on high power and cancel other functions.
Details how to select channels using up/down keys or a shortcut via the keypad.
Explains how to add or delete channels from the scan memory using the M+ key.
Details how to handle routine DSC calls, including acknowledgement and switching to voice channel.
Describes how to handle received group DSC calls, including alarms and voice messages.
Instructions for sending a distress alert, emphasizing it's for life-threatening situations only.
Explains the process of making a routine DSC call, including recipient details and channel selection.
Details how to send urgency and safety DSC calls, including confirmation screens.
Describes how to send a group DSC call to other members of a pre-defined group.
Details how to review the log of received routine calls, showing the most recent first.
Explains how to review the log of received distress calls, showing the most recent first.
Details how to view received NAVTEX messages and their identification list.
Details how to adjust the brightness of the backlight and keypad lighting.
Explains how to adjust the contrast of the S15's screen display.
Details how to select the internal, external, or both speakers for audio output.
Explains how to enable or disable the BEEP tone function for various alerts and inputs.
Details the crucial process of setting the vessel's Maritime Mobile Service Identifier (MMSI) number.
Explains how to enter and set a Group ID for flotillas or fishing fleets.
Details how to set the current date and time in 24-hour format.
Explains how to manually enter vessel position and UTC time if GPS input is unavailable.
Guides on setting up and managing working channels for routine and group calls.
Explains how to add, edit, and delete entries in the directory of called MMSI numbers and vessel names.
Details how to select NAVTEX stations to either RECEIVE or IGNORE their messages.
Explains how to choose which message categories to RECEIVE or IGNORE.
Details the process to clear all received NAVTEX log messages after confirmation.
Details how to set the number of waypoints to be stored, up to a maximum of 50.
Explains how to enter waypoint positions (latitude, longitude) and names.
Details how to review stored waypoint positions and identify the current waypoint.
Explains the information displayed in the Navigation View, including position, COG, SOG, BTW, and DTW.
Details the procedure for inserting a new waypoint between existing ones in the sequence.
Explains how to delete a specific waypoint from the stored list after confirmation.
Details the technical specifications of the S15's multi-channel receiver.
Provides general specifications for the Channel 70 monitor function.
Details the technical specifications of the S15's transmitter, including type, range, and power.
Lists the specifications related to the NAVTEX function, such as messages stored and input format.
Details the specifications for the GPS input, including data format.
Details recommendations for siting the S15 unit, considering noise, sunlight, and compass proximity.
Offers advice on the best practices for installing the antenna for optimal performance.
Information regarding the CE conformity marking and the product's intended use.
To Next Page