Silva s15 User Manual

Operation Manual S15
Page
40
When vessel gets to the current waypoint, the next numerical waypoint
automatically becomes the current waypoint. As long as waypoints are
entered in a strict numeric sequence this allows a simple route to be
created.
11.5 Insert Waypoint
Press
▲
or
▼
key to move symbol
►
on the GPS NAVIGATION screen
to front of INSERT WAYPOINT, then press
(ENT)
key, the INSERT
WAYPOINT screen will appear on the display as below:
When you insert a new waypoint between waypoint 1 and waypoint 2 as
an example, the new waypoint will become waypoint 2. The numbers of
subsequent waypoints will be moved downward sequentially.
Enter the inserted waypoint number, then press (ENT) key, the SET
WAYPOINT screen will appear on the display as below :
If you want to insert the new waypoint after current waypoint, then the
INSERTED WAYPOINT number will be replaced as the current waypoint
number.

Silva s15 Specifications

General

Receiver Sensitivity	0.25 μV (12dB SINAD)
Channel Spacing	25 kHz
Modulation	FM
Current Consumption	1.5A (max)
Frequency Range	400-470MHz
Output Power	5W