Operation Manual S15
Page
38
If need enter the next waypoint, press (ENT) key, or press (CLR) key to
return back to GPS NAVIGITION setting screen.
11.3 Review Waypoint
To review the waypoint position, press ▲ or ▼ key to move the symbol
► on the GPS NAVIGATION setting screen to front of WAYPOINT
OVER VIEW, then press (ENT) key to confirm, the REVIEW WAYPOINT
screen will appear as below:
The symbol ▲ or ▼ on the screen indicate that there are more waypoints
at the front or back of the page. Use ▲ or ▼ key to review them
continuously.
The waypoint with ► symbol is the current waypoint. When vessel
passes close to this waypoint, the next waypoint automatically becomes
the current waypoint.
If you want to change a waypoint to become the current waypoint, press
▲
or
▼
key on the mike keypad to move the symbol ► on the screen to
front of it, then press (ENT) key to confirm.
11.4 Navigation View
To enter to NAVIGATION view screen, press
▲
or
▼
key to move
symbol ► on the GPS NAVGATION SETTING screen to front of
NAVIGATION, then press (ENT) key.
To Next Page
Loading...
Need help?
General