Operation Manual S15
Page
9
4. General Operation
The S15 is switched on by pressing the (ON) key once. If a GPS receiver
and a NAVTEX receiver have been connected to the S15, the main
screen will be as bellow:
Press the (F) key on the front panel once to enter function selection
mode. The FUNCTION SELECTION screen will be displayed as follows:
Press the
▲
or
▼
key to move the
►
symbol on the screen to the
required function (DUAL WATCH, or FULL SCAN, or MEMORY SCAN,
or H/L POWER and DIM), then press
(F)
key confirm. Dual watch, Full
Scan, Memory Scan, H/L Power or DIM can be selected, the relevant
screen will be displayed. Press (F) key again to restore normal operation,
and press (CLR) key to change to main screen.
4.1 DUAL WATCH (DW)
Dual watch enables the radio to scan between the selected channel and
priority channel (normally CH16). When in dual watch mode, the DW
indicator will appear on the bottom line of the LCD.
To Next Page
Loading...
Need help?
General