Place the spools on the spool pins. For notes on the
spool net, the thread run-off disc, the foam pads and
the cone holders. Thread the threads from the back
to the front through the thread guides as indicated by
the codes.
Please Note: Thread in a sequence of 1 to 5.
Threading the thread guides
13
After threading the thread guide bar, slip the thread
into the first guide on the machine. To do this, pull the
thread down with both hands until it slips under the
thread guide. Pass the thread between the tension
discs and pull it down so that it is between the tension
discs.
To Next Page
Loading...
Need help?
General
