Silver 5 Thread User Manual

Press the upper looper disconnection lever down and
push it to the left. Turn the hand wheel to ensure that
the looper is indeed disengaged.
To engage the upper looper, push the upper looper
disconnection lever into its position to the right. Turn
the hand wheel until the looper engages with an
audible click and moves upwards again. Close the
front cover and attach the trim catcher.
You can disengage the upper overedge looper with
the upper looper disconnection lever. Remove the
trim catcher and open the front cover. Turn the hand
wheel to bring the looper to its lowest position.
29
Disengage the upper looper

Silver 5 Thread Specifications

General

Brand	Silver
Model	5 Thread
Category	Sewing Machine
Language	English