Silver 5 Thread User Manual

Important note on threading
The needles must always be threaded last so that the
needle threads do not run under the looper thread as
seen in drawing 1, but instead over the looper thread
as depicted in drawing 2. Should this sequence not
be followed, thread breakage or missed stitches can
occur.
20
Threading the needles
If the looper threads break, you must pull the needle
threads out of the needle eye, rethread the loopier
thread and then rethread the needle threads.

Silver 5 Thread Specifications

General

Brand	Silver
Model	5 Thread
Category	Sewing Machine
Language	English