67
SKM 500 A1
GB
MT
Assembly
Mixing bowl with kneading knife, cutting knife or
emulsifying disc
NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1)
Attach the drive shaft i to the shaft holder.
2) Place the mixing bowl u onto the motor block o in such a way that the
arrow is pointing at the symbol
and rotate the mixing bowl u until the
arrow is pointing at the symbol
. The mixing bowl u is now fi xed.
3) Put the drive shaft adapter z onto the drive shaft i.
4) Now choose your insert:
– the kneading knife r for stirring cak
e dough,
– The cutting knife t for chopping onions, Parmesan cheese and the
like, or
– the emulsifying disc 4 for whipping cream, beating egg white or
making light desserts.
■ Kneading r or cutting knif
e t: Slide the kneading knife r or the cutting
knife t onto the drive shaft adapter z so that the locking mechanisms
engage.
■ Emulsifying disc 4: F
it the emulsifying disc 4 to the drive shaft adapter z
in such a way that the locking mechanisms engage.
5) Put the lid 3 onto the mixing bowl u so that the arrow on the lid 3 points
to the symbol
(white square) on the mixing bowl u. Then rotate it until
an audible “click” is heard and the arrow is pointing to the symbol
(white
arrow).
6) Slide the pusher 1 into the fi lling shaft 2.
7) Insert the plug into the mains power socket.
To Next Page
Loading...
