Silvercrest KH 2450 - Switch-Off Options

40
10
Place the multi-function slider
h
at » START«; the voice recorder now
functions as the microphone for the dictation/voice recognition soware
on the PC. In the display
q
is indicated:
VOL± ESC
PC Microphone
Record
Mode
In the meanwhile you can adjust the record sound volume level between the values
of  (muted) and  (maximum volume).
To increase the record sound volume: Press the function button B
e
: With each
press of the button you raise the record sound volume by a step. For a faster raising
of the record sound volume you can also hold down the function button B
e.
To reduce the record sound volume: Press the function button C
r
: With each press
of the button you reduce the record sound volume by a step. For a faster reduction of
the record sound volume you can also hold down the unction button C
r.
e currently adjusted record volume level is indicated for a few seconds in the display
q
.
To terminate PC microphone operation: Select, by pressing the function button A
w
,
»ESC«; In the display
q
the Menu is once again shown. To return to the start
screen: select, by pressing the function button A
w
twice in succession, »ESC«.
8.8 Switch-o options
From the factory, this voice recorder is set so that aer  minutes, and without a
button being pressed, it switches itself o automatically. Additionally, it can be set
so that …
Ú
it automatically switches itself o aer  minutes without a button being
pressed.
Ú
it can only be manually switched o by pressing the button »ON/OFF«
a
.
To carry out the settings:
Bedienungsanleitung KH 2450 EN.indd 40 23.12.2008 23:09:44