Silvercrest SDABC 1 A2

23GB/IE/NI
Switching the product on/off (power adaptor)
 Fully extend the antenna [7] for good reception.
 Set the main switch [3] to the ON position. The product is now in
standby mode.
The LCD display [1] shows:
– Current time []
– Alarm settings for alarm 1 [] and alarm 2 []
 Switching the product on: Press /Mode [8].
 When using the product for the first time it automatically scans for
DAB+ stations after being switched on.
The progress bar in the LCD display [1] indicates the progress
of the DAB+ station scan. The number above the progress bar
indicates how many DAB+ stations have been found.
After the DAB+ station scan is completed, the product selects the
first available DAB+ station and starts playing it. By default, the
DAB+ stations are listed in numerical and alphabetic order.
 Press and hold /Mode [8]. The product switches to standby
mode.
The LCD display [1] shows:
– Current time []
– Alarm settings for alarm 1 [] and alarm 2 []