58 GB/IE/NI
NOTE: A factory reset is only possible in network operation. If
you operate the product using batteries and select Yes in order
to carry out a factory reset, the LCD display [1] displays the
warning message All settings will be restored to factory
defaults! Are you sure? Connect the product to the mains
power (see “Connecting the power adaptor to the mains power
supply“).
Cleaning and care
Before cleaning: Disconnect the product from the power supply
and remove the batteries.
m
WARNING! Never immerse the product nor the power adaptor
in water or other liquids for cleaning purposes. Never immerse
any of the product‘s components under running water.
Clean the product with a slightly moistened cloth.
Do not allow any water or other liquids enter the product’s interior.
Do not use solvent‑based cleaning agents, abrasives, harsh
cleaning solutions or hard brushes for cleaning.
Let all parts dry afterwards.
Storage
Before storing the product: Remove the batteries. Store the product
in its original packaging.
Store the product in a dry, secure location away from children.
To Next Page
Loading...
Need help?
General
