9
GB
6. Overview of functions
Button/
Working tool
Function Notes
TARE / Weighing32
Weighing accurately to the gram with
Tara function (set to 0 to weigh additional
ingredients)
- Up to 5,000 g
- Works only in idle state, not during
operation
Anti-clockwise rota-
tion34
Gentle mixing of food not to be chopped - Speed 1 - 3
Turbo36
- Press the button to switch to the highest
speed, e.g. to chop nuts and small
amounts of herbs or onions
- Keep the button pressed for as long as
you want the function to be active
- Function is blocked if the food temper-
ature in the blender jug exceeds
60 °C.
- For liquids: up to max. 2.5 litres
- Do not use with a mixer attach-
ment20
Blade assembly18
- For mincing, chopping, puréeing
- For the program KNEADING
- With the function
ANT-CLOCKWISE
for gentle mixing
- Must always be used to seal the
blender jug5
- If necessary, cut food first in pieces
with an edge length of approx.
3-4cm
Mixer attachment20
For fluid food
- To whip cream (at least 200 g)
- To whip egg white (at least 4 eggs)
- To emulsify (e.g. mayonnaise)
- Must only be used with speed settings
1 to 4
- Must not be used with function Turbo
Cooking pot19
To cook and stew Fill the blender jug5 with at least 500 ml
of water
KNEADING42
To knead doughs with the blade assem-
bly18
- A maximum of 500 g flour can be
used for heavy doughs
- A maximum of 600 g of flour can be
used for light doughs (e.g. sponge
mixture)
STEAMING41
Program for the gentle steaming with
steamer attachments2 and3, especially
for vegetables, fish and meat
Also possible with the cooking pot19
ROASTING40
For lightly browning food, e.g. meat or
onions
- Small quantities, cut in pieces
- Minced meat up to 1,000 g (500 g
for browning - up to 1,000 g for mix-
ing)
CookingPilot29
(Recipes for guided cook-
ing)
The individual steps of a recipe are dis-
played on the screen step by step.
The function is possible for the recipes in
the device as well as for the recipes you
have downloaded to the device.
__317552_MC-Connect_GB.book Seite 9 Donnerstag, 21. März 2019 10:53 10