■ 10 │ GB
│
CY
SKV 1200 A1
Working with special accessories
NOTE
► The special accessories, such as a meat
grinder attachment, a noodle attachment and
vegetable grater, can be ordered online at
www.kompernass.com.
ATTENTION! PROPERTY DAMAGE!
► The drive unit for special accessories o
should only be used for accessories which
are specifically approved for use with this
appliance by the manufacturer.
1) Turn the appliance off using the rotary switch 3
(Position “0”).
2) Push the cover over the drive unit for special
accessories o upwards and remove it from
the appliance.
3) Attach the special accessory to the appliance
in accordance with its operating instructions.
ATTENTION! PROPERTY DAMAGE!
► Never use special accessories at the same
time as the mixing bowl 6 or blender t!
This will overload the motor!
After you have finished using
your appliance
1) Turn the appliance off using the rotary switch 3
(Position “0”).
2) Disconnect the special accessory from the ap-
pliance as stated in its operating instructions.
3) Clean all components as described in the
section “Cleaning and care”.
4) Place the cover for the drive unit for special
accessories o back in position.
Cleaning and care
DANGER – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the appliance in water or
any other liquid!
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces.
NOTES
► We recommend cleaning the appliance
directly after use. This makes food residues
easier to remove.
► Processing foods that contain strong pig-
ments, such as carrots, may lead to staining
of the plastic parts. These stains can be
removed using a little cooking oil.
Cleaning the appliance
■ Wipe the appliance with a damp cloth. For
stubborn soiling use a mild detergent on the
cloth. Wipe off any detergent residue using a
cloth moistened with clean water. Then dry the
appliance carefully.
Cleaning the accessories
■ Clean the mixing bowl 6, the lid 9, the cover
of the filling opening 8, the blender lid r with
measuring cup e, the drive protection cover u,
the blender tool p and the attachments 0 q w
in warm water with a little detergent. Any residues
can be removed with a washing-up brush. Rinse
all parts with warm clean water and make sure
that all parts are dry before re-using them.
To Next Page
Loading...
