GB
│
CY │ 11 ■
SKV 1200 A1
NOTE
► The attachments 0 q w, the lid 9 and the
mixing bowl 6 are also suitable for cleaning
in the dishwasher.
► If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed.
► If possible, place all plastic parts in the top
basket of the dishwasher.
Cleaning the blender
WARNING! RISK OF INJURY!
► Do not touch the blades z with your bare
hands.
■ Clean the blender t and the blender lid r
with measuring cup e in warm water and add
a mild detergent (washing-up liquid). Then rinse
all parts with clean water so that no detergent
residues remain.
■ If this cleaning is not sufficient, you can unscrew
the blade holder A with the blade z from the
blender jug C using the blender tool p:
C
A
B
C
A
B
A Blade holder
B Sealing ring
C Blender jug
– Turn the blender t over.
– Insert the blender tool p into the underside
of the blender t/ the blade holder A so
that the two catches on the underside of the
blender t/ the blade holder A grip into
the recesses in the blender tool p.
– Turn the blender tool p towards
(anti-
clockwise) until the blade holder A with the
blade z can be lifted out of the blender t.
– Pull the sealing ring B from the blade
holder A with the blade z.
■ Now you can clean all the parts (blender jug C,
blade holder A the blade z and sealing ring B)
in warm water with a little washing up liquid
using a washing up brush. Afterwards, rinse all
the parts with clean water so that no detergent
residues remain.
NOTE
► The blender jug C, the blade holder A with
the blade z and the sealing ring B are all
dishwasher-safe.
If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed. We recommend
using the top rack of the dishwasher and a
washing programme with max. 45°C.
► The blender lid r with the measuring cup e
is not dishwasher-safe.
To Next Page
Loading...
