Silvercrest SRH 5 C3 - Basic Operation and Radio Functions; Handling and operation

GB
│
IE
│
NI │ 13 ■
SRH 5 C3
Handling and operation
Switching the device on/off
NOTE
► The DAB+ station list is automatically created or updated the first time
the device is switched on from standby mode using the button 2. The
display
1 now shows the message Scanning.... Depending on the quality
of the DAB+ radio reception, this process can take up to several minutes.
► When you switch on the device from standby mode with the
button 2,
the device will be in the last selected mode (DAB, FM, Bluetooth
®
or
AUX IN).
♦ Briefly press the
button 2 to switch on the device. The device automati-
cally starts in DAB+ radio mode the first time it is switched on.
♦ Briefly press the SOURCE /
button 3 to switch between DAB+, FM
radio operation, Bluetooth
®
or AUX IN mode.
♦ Press the
button 2 again to switch off the device and put it into standby
mode.
Adjusting the volume
♦ Turn the VOLUME | ENTER / SCAN dial6 clockwise to increase
the volume.
♦ Turn the VOLUME |
ENTER / SCAN dial6 anticlockwise to reduce
the volume.
NOTE
► The display
1 shows the volume as a bar for a few seconds after turning
the VOLUME |
ENTER / SCAN dial6.