Silvercrest SRH 5 C3 - Factory Settings; Software Version

■ 36 │ GB
│
IE
│
NI
SRH 5 C3
Factory settings
NOTE
► If you reset the device to the factory defaults using the Factory reset func-
tion, all stored settings such as stored radio stations, date, time and alarm
times will be deleted.
♦ While in the System menu, press the TUNE+
8 or TUNE−7 button (several
times if necessary) or turn the VOLUME | ENTER / SCAN dial6
until Factory reset appears on the display 1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or the TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select Yes (the device is reset to the
factory settings) or No (the device is not reset to the factory settings).
♦ Press the VOLUME |
ENTER/SCAN dial6 to reset the device to
its factory settings. The message Restarting... appears on the display 1.
The device restarts and then automatically switches to standby mode.
Software version
♦ While in the System menu, press the TUNE+8 or TUNE−7 button (several
times if necessary) or turn the VOLUME | ENTER / SCAN dial6
until SW version appears on the display 1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to display the software
version of the device.