Silvercrest SRH 5 C3 - Alarm settings

GB
│
IE
│
NI │ 27 ■
SRH 5 C3
Alarm
The device has two alarm functions, Alarm 1 and Alarm 2, both of which can
be programmed to play the last radio station you listened to or a certain preset
(DAB+ or FM) or to play an alarm at a specific time on certain days.
Setting the alarm
♦ While in the System menu, press the TUNE+8 or TUNE−7 button
(several times if necessary) or turn the VOLUME | ENTER / SCAN
dial6 until Alarm appears on the display 1.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select Alarm 1 or Alarm 2.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
The display
1 shows the message Alarm (1/2) Setup.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
The display
1 shows the message Alarm (1/2) On time and the hour
display flashes.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the hours.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The minutes flash on the display1.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the minutes.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The display1 shows the message Alarm (1/2) Duration and the minute
display flashes.
♦ Press the TUNE+
8 or TUNE−7 button several times or turn the
VOLUME | ENTER / SCAN dial6 to set the alarm duration
(15, 30, 45, 60, 90, 120 minutes).
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The display
1 shows the message Alarm (1/2) Source.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the sound source of the alarm clock. You can
choose between an alarm tone (Buzzer), the last station you listened to or
a stored DAB+ or FM radio station (DAB/FM).