Silvercrest SRH 5 C3 - Connecting External Playback Devices (aux in Mode); Connecting Headphones

■ 24 │ GB
│
IE
│
NI
SRH 5 C3
Connecting external playback devices (AUX IN mode)
In AUX IN mode, you can connect external playback devices such as a smart-
phone or an MP3 player to use them as the playback source for the radio.
NOTE
► Switch the radio and the external playback device off before connecting
them. Note also the operating instructions for the device that you want to
connect to the radio.
♦ Connect the external playback device to the AUX IN socket
w of the radio
using the supplied AUX cable.
♦ Briefly press the
button2 to switch on the radio.
♦ Briefly press the SOURCE/
button 3 (several times if necessary) until
AUX IN appears on the display
1.
♦ Turn on the external playback device and start playback.
♦ Afterwards, set the desired volume using the VOLUME |
ENTER /
SCAN dial
6 on the radio. Alternatively, you can increase the volume on
the external playback device.
♦ To exit AUX IN mode, turn off the radio and the external playback device.
Remove the AUX cable
from the AUX IN socket w of the radio.
Alternatively, you can press the SOURCE/
button 3 to switch directly
from AUX IN mode to radio mode or Bluetooth
®
mode.
Connecting headphones
CAUTION
Take care when using headphones.
Listening to music on headphones for long periods and at high volume levels
can lead to hearing damage.
► Always start by setting a low volume and then adjust it to a comfortable
level.
► Always use headphones in such a way that you can still hear ambient
noise.