Silvercrest SRH 5 C3 - Time;Date

■ 30 │ GB
│
IE
│
NI
SRH 5 C3
Time/date
If an RDS signal (radio data system) is available, the date and time are automat-
ically set via the radio stations. If no RDS signal is available, you can also set the
date and time manually:
Setting the date and time
♦ While in the System menu, press the TUNE+8 or TUNE−7 button (several
times if necessary) or turn the VOLUME |
ENTER / SCAN dial6
until Time appears on the display
1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or TUNE−7 button several times or turn the
VOLUME |
ENTER / SCAN dial6 until Set date/time appears on
the display
1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
Set time appears on the display
1 and the hour display flashes.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the hours.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The minutes flash on the display
1.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the minutes.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry. Set
date appears on the display
1 and the day flashes on the date display.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the day.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The month flashes on the date display
1.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the month.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The year flashes on the date display
1.