Silvercrest SRH 5 C3 - Page 32

GB
│
IE
│
NI │ 29 ■
SRH 5 C3
Switching off the alarm
♦ When the alarm goes off at the set time, press any button. The alarm will
stop and remain off for 24 hours or until the next programmed alarm time.
Pausing the alarm (Snooze function)
♦ When the alarm goes off at the set time, press the VOLUME | ENTER /
SCAN dial
6 once or several times to pause the alarm (radio or alarm
buzzer) for 5, 10, 15 or 30 minutes. The display
1 now shows the mes-
sage Snooze and the remaining time until the alarm goes off again.
NOTE
► If you want to stop the snooze function and the alarm prematurely, press
the
button 2.
Switching the alarm on/off
♦ While in the System menu, press the TUNE+8 or TUNE−7 button (several
times if necessary) or turn the VOLUME |
ENTER / SCAN dial6
until Alarm appears on the display 1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select Alarm 1 or Alarm 2.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 until Alarm Off or Alarm On appears on the
display1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.