Silvercrest SRH 5 C3 - Page 31

■ 28 │ GB
│
IE
│
NI
SRH 5 C3
♦ Press the TUNE+8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select the desired sound source.
♦ Once you have set DAB or FM as the sound source for the alarm, press the
TUNE+
8 or TUNE−7 button or rotate the VOLUME | ENTER /
SCANdial 6, to choose between the last DAB+ or FM radio station you
listened to or one of the preset stations.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The display1 shows the message Daily.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the days (daily, once, weekends, weekdays)
on which the alarm should be activated.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select the desired days.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
The volume level appears on the display 1.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the desired volume of the alarm clock.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the setting.
The display 1 shows the message Alarm Off.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select Alarm On.
♦ Save your settings by pressing the VOLUME |
ENTER / SCAN
dial6. The display 1 shows the message Alarm Saved. The alarm
clock is now activated.
NOTE
► The alarm settings are only saved if you then confirm your settings under
the menu option Alarm On or Alarm Off by pressing the VOLUME |
ENTER / SCAN dial6.
► As soon as Alarm 1 and/or Alarm 2 are active,
an alarm symbol is
shown on the left and/or right of the display1 for each active alarm.