Silvercrest SRH 5 C3 - Page 34

GB
│
IE
│
NI │ 31 ■
SRH 5 C3
♦ Press the TUNE+8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to set the year.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the entry.
The display
1 shows the message Time saved.
NOTE
► In standby mode, the time and date are shown on the display
1.
Automatic update
The Auto update function allows you to set whether the date and time are set
automatically via the radio stations' RDS (Radio Data System) signal or manually.
NOTE
► If Update all is set, the date and time are set automatically via the RDS
signal from the radio stations.
► If Update from DAB and Update from FM are set, the date and time are
set automatically via the RDS signal of the DAB+ or FM radio stations.
► If No update is set, the date and time are not set automatically, but must
be set manually.
► The default setting for the Automatic Update function is From radio.
♦ While in the System menu, press the TUNE+
8 or TUNE−7 button (several
times if necessary) or turn the VOLUME | ENTER /
SCAN dial
6 until Time appears on the display 1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or TUNE−7 button several times or turn the
VOLUME |
ENTER / SCAN dial6 until Auto Update appears
on the display1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to choose between Update all, Update from
DAB, Update from FM or No update.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.