GB
│
IE
│
NI │ 17 ■
SRH 5 C3
Dynamic Range Control (DRC)
The DRC function ensures that quieter passages are better heard when playing
DAB+ radio stations when the radio is used in a noisy environment.
♦ In DAB+ radio mode, press the INFO/MENU button
4 for about
2 seconds to call up the DAB settings menu.
♦ Press the TUNE+
8 or TUNE−7 button several times or turn the
VOLUME | ENTER / SCAN dial6 until DRC appears on the
display1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ If necessary, press the TUNE+
8 or TUNE−7 button or turn the
VOLUME |
ENTER / SCAN dial6 to select DRC high, DRC low
or DRC off.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
Changing the station order
You can sort the order of DAB+ radio stations in the station list by name
(Alphanumeric) or by programme groups (Ensemble).
♦ In DAB+ radio mode, press the INFO/MENU button
4 for about
2 seconds to call up the DAB settings menu.
♦ Press the TUNE+
8 or TUNE−7 button several times or turn the
VOLUME | ENTER / SCAN dial6 until Station order appears
on the display1.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
♦ Briefly press the TUNE+
8 or TUNE−7 button or turn the VOLUME |
ENTER / SCAN dial6 to select Alphanumeric or Ensemble.
♦ Press the VOLUME |
ENTER/SCAN dial6 to confirm the selection.
To Next Page
Loading...
