GB
│
IE
│
NI
│
13 ■
SRWK 800 A1
Requirements for the set-up location
For safe and trouble-free operation of the device, the set-up location
must fulfil the following requirements:
■ Place the device on a firm, flat and level surface.
■ Position the device so that the speaker
0 is not covered.
■ Do not operate the device in a hot or very wet environment or
in the vicinity of combustible materials.
■ The mains socket must be easily accessible so that the plug can
be easily pulled out in an emergency.
Connecting the power supply
CAUTION
► Before connecting the device, compare the connection data
(voltage and frequency) on the rating plate on the rear of the
device with that of your electric supply. This data must agree so
that the device is not damaged.
♦ Connect the mains cable
q to a mains socket. The device is now
in standby mode.
To Next Page
Loading...
