Silvercrest SRWK 800 A1 - Time and Display Settings; Setting the Current Time; 12 h;24 h Time Format Selection

■ 16
│
GB
│
IE
│
NI
SRWK 800 A1
Time/weekday
Setting the time
♦ Set the function switch r to TIME SET. The time display flashes.
♦ Turn the VOLUME/HOUR
‒
/+ dial 2 clockwise or anticlock-
wise to set the hours.
♦ Turn the TUNING/MIN.
‒
/+ dial 3 clockwise or anticlockwise
to set the minutes.
♦ Set the function switch
r to CLOCK. The time display stops
flashing and the time setting is saved.
12h/24h display
NOTE
► If the 12h display is set, PM appears on the left of the display
1
from 12 noon until 11:59 at night.
► The default setting of the time is the 12h display.
♦ Set the function switch
r to TIME SET. The time display flashes.
♦ Briefly press the SLEEP/NAP │12 / 24 button 8 once. 24H or
12H flashes on the display 1.
♦ Turn the VOLUME/HOUR
‒
/+ dial 2 clockwise or anticlock-
wise to switch between the 24h and 12h display.
♦ Set the function switch
r to CLOCK. The display stops flashing
and the 12h/24h display setting is stored.