Silvercrest SRWK 800 A1 User Manual

■ 18
│
GB
│
IE
│
NI
SRWK 800 A1
Manual station search
♦ In radio mode, press the │‒ 5 or the │+/MEM 7
button for about 2 seconds to search for a station with a lower
or higher frequency. The search stops at the first station with a
sufficiently strong signal.
Searching for stations manually
♦ In radio mode, set the desired station by turning the TUNING/
MIN.
‒
/+ dial 3. To do so, turn the TUNING/MIN.
‒
/+ dial 3
clockwise or anticlockwise to search for a radio station with lower
or higher frequency. The frequency can be changed in steps of
0.05MHz.
NOTE
► The frequency of the station is shown on the display
1 and the
loudspeaker 0 is switched off during station search.
Saving stations manually
♦ To store the current radio station, briefly press the │+/MEM
button 7 and then use the TUNING/MIN.
‒
/+ dial 3 to select
the desired programme position (P01–P20). The programme
position numbers are shown at the bottom of the display 1.
♦ Briefly press the │+/MEM button 7 to save the current
radio station in the selected programme position.
Calling up saved stations
♦ In radio mode, briefly press the │‒ button 5 once to call up
the next higher programme position.
♦ Alternatively, press the
│‒ button 5 and, within the next
3 seconds, use the TUNING/MIN.
‒
/+ dial 3 to select the
desired programme position (P01–P20). To do so, turn the
TUNING/MIN.
‒
/+ dial
3 clockwise or anticlockwise to
search for a lower or higher programme position.

Silvercrest SRWK 800 A1 Specifications

General

Brand	Silvercrest
Model	SRWK 800 A1
Category	Clock Radio
Language	English