Silvercrest SRWK 800 A1 - Alarm Activation and Control; Selecting Alarm Weekdays; Turning Alarms On;Off

■ 20
│
GB
│
IE
│
NI
SRWK 800 A1
♦ Briefly press the │‒ 5 or the │+/MEM 7 button to set
the weekday on which the alarm is to be activated.
♦ Turn the VOLUME/HOUR
‒
/+ dial
2 clockwise or anticlock-
wise to choose between these three settings:
– 1-5: Active Monday to Friday /
/
)
– 1-6: Active Monday to Saturday (
/
/
)
– 1-7: Active Monday to Sunday (daily) (
/
/
MONTUEWED
THUFRISATSUN
)
♦ Set the function switch
r to CLOCK. The display stops flashing
and the alarm function setting is stored.
♦ Press the button the
│‒ 5 or the │+/MEM 7 button
to activate the set Alarm 1 or Alarm 2. The display 1 shows the
corresponding alarm symbol or for each active alarm
at the top and the set alarm time at the bottom.
NOTE
► If alarm 1 or alarm 2 are activated, the days of the week on
which the alarm is active are shown in display
1 above the
current time:
– MON = Monday
– TUE = Tuesday
– WED = Wednesday
– THU = Thursday
– FRI = Friday
– SAT = Saturday
– SUN = Sunday
► If alarm 1 and alarm 2 are activated, the display
1 shows the
weekdays and alarm time of alarm 2.
► If the alarm type 'radio playback' is set, the last selected radio
station is played back.