Silvercrest SRWK 800 A1 - Troubleshooting Specific Issues; Settings Reset and Radio Interference

■ 26
│
GB
│
IE
│
NI
SRWK 800 A1
Fault Possible cause Remedy
The time, the date
and the station
presets are reset
after a power
failure.
No batteries in the
battery compart-
ment
9 or batteries
are dead.
Check that the bat-
teries have sufficient
charge and replace
them if necessary.
The batteries are
inserted incorrectly in
the battery compart-
ment
9.
Check that the
batteries are inserted
correctly in the bat-
tery compartment 9.
Place the batteries
into the battery
compartment 9
as indicated on the
polarity diagram.
Interference with
the radio recep-
tion.
Radio reception is too
weak.
Completely unwind
the wire aerial
w.
Try to improve recep-
tion by moving the
wire aerial w or by
setting up the radio in
a different location.
NOTE
► If you cannot solve the problem with the solutions given above,
please contact the Service Hotline (see section Service).