Silvercrest SSJ 300 A2 - Sorbet Assembly Instructions

35
GB
11. Press the lid4 down lightly while turn-
ing it clockwise until the point symbol•
points to the closed lock symbol .
Mount the filling aid2
12. Insert the filling aid2 onto the food
chute3 to facilitate the filling of the
prepared food.
13. Place the pulp container16 under the
pulp outlet17.
14. Place the juice container15 under the
juice outlet9.
7.1 Insert the sorbet
assembly
If you want to make sorbet, assemble the de-
vice as described. But use the sorbet assem-
bly19 instead of the holder7 and the
screen assembly6.
• Place the sorbet assembly19 into the
working container8 so that the sorbet
outlet18 opens into the juice outlet9.
Then continue with assembly step 9.
• Place the juice container15 under the
juice outlet9 to catch the finished sor-
bet. The pulp container16 is not need-
ed.
2
3
19
8
18
9
__331036_Slow Juicer_B8.book Seite 35 Donnerstag, 7. November 2019 12:33 12