25GB/IE
Operation
The product must not be
left unattended while it is
connected to the supply mains.
Do not move the product while
it is in operation.
Do not use the product without
an inserted set of plates.
Do not place the product on
hot plates (gas, electric, coal
cooking range etc.). Operate
the product on a level, stable,
clean, heat-resistant and dry
surface.
Do not cover the product while
it is in use or shortly after use,
when it is still hot.
Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates.
The use of extension cords is
not recommended.
If the use of an extension
cord is necessary, it must be
designed for a current flow of
at least 10 A.
Lay cords in such a way that
they may not be tripped over
or otherwise damaged.
The product is not intended
to be operated by means of
an external timer or separate
remote-control system.
No action is needed from users
to shift the product between
50 and 60Hz. The product
adapts itself for both 50 and
60Hz.
To Next Page
Loading...
