Silvercrest SURQ 4 A2 - Bluetooth Mode; Pairing Bluetooth Devices

English – 25
SYSTEM AUTO
TIME
SYNC
Choose whether or not the date and time are set automat-
ically.
UPDATE FROM ANY: set the time via DAB/FM
UPDATE FROM DAB: set the time via DAB
UPDATE FROM FM: set the time via FM
NO UPDATE: no automatic time setting
RESET Reset to factory settings
YES: reset the device
NO: do not reset the device
SW VER Display of software version
13. Bluetooth
®
mode
You can use Bluetooth
®
to play tracks wirelessly from external devices (such as MP3 play-
ers or mobile phones with Bluetooth
®
) on this device.
` Press the
button repeatedly until is shown on the display.
13.1. Pairing Bluetooth
®
devices
` Enable the Bluetooth
®
function on your external device and pair the devices. Refer to
the user manual for your audio playback device for more information. The name of the
DAB/FM clock radio is “SURQ 4 A2”.
` If you are prompted to enter a password on the external device, enter “0000” as the
password.
During the pairing process, PAIRING flashes on the display.
` Pairing is complete once CONNECT appears on the display and an ascending acous-
tic signal sounds. The external device can now be used with the DAB/FM clock radio.
` If you would like to end Bluetooth
®
transmission, switch off Bluetooth
®
on the external
device, use to change the source on the DAB/FM clock radio or press and hold the
button until pairing mode restarts. Upon disconnection, a descending acoustic sig-
nal sounds.
You can control how tracks are played, the volume and a range of special functions on
your external device and on the DAB/FM clock radio. What functions are available is de-
pendent on your external device and the software that you use.
` Press the button to increase the volume, press the button to decrease the volume.
` Press the button to start or stop playback.
` Press the  button to skip back to the start of the track; press the button again within 3
seconds to return to the previous track.
` Use the  button to switch to the next track.