Silvercrest SURQ 4 A2 - Cleaning the Device; Resetting the Device; Connecting Headphones

English – 27
15. Connecting headphones
There is a 3.5mm jack connection labelled on the back of the device.
` Plug the headphone connection cable with a 3.5mm jack plug into the jack connec-
tion.
WARNING!
Possible hearing damage!
Excessive sound pressure when using earphones and head-
phones can result in damage to and/or loss of hearing.
Using headphones to listen to a device playing at high vol-
ume for an extended period can damage your hearing.
 Before pressing play, set the volume to the lowest setting.
16. Resetting the device
The device can be reset as described in section “12. Settings menu” on page 24 un-
der the menu option SYSTEM / RESET. This resets the device to its factory settings and all
stored stations and station lists as well as alarms and the time are deleted.
17. Cleaning the device
Damage to the device due to static electricity, incorrect cleaning agents or the
penetration of liquids!
Follow the instructions to avoid situations that may damage the device.
Use only use a slightly damp cloth with a mild cleaning agent or an antistatic
cloth.
Make sure that no liquids penetrate the device.
` Regularly wipe the device housing with a slightly damp cloth or an antistatic cloth.