SIM Tech SIMCom SIM800C User Manual

Smart Machine Smart Decision
SIM800C_Hardware_Design_V1.00 50 2014-10-30
8. Appendix
I. Related Documents
Table 43: Related documents
SN
Document name
Remark
[1]
SIM800 Series AT Command
Manual
[2]
SIM800 Series UART Port
Application Note_V1 01.doc
[3]
ITU-T Draft new
recommendation V.25ter：
Serial asynchronous automatic dialing and control
[4]
GSM 07.07：
Digital cellular telecommunications (Phase 2+); AT command set for
GSM Mobile Equipment (ME)
[5]
GSM 07.10：
Support GSM 07.10 multiplexing protocol
[6]
GSM 07.05：
Digital cellular telecommunications (Phase 2+); Use of Data
Terminal Equipment – Data Circuit terminating Equipment (DTE –
DCE) interface for Short Message Service (SMS) and Cell
Broadcast Service (CBS)
[7]
GSM 11.14：
Digital cellular telecommunications system (Phase 2+);
Specification of the SIM Application Toolkit for the Subscriber
Identity Module – Mobile Equipment (SIM – ME) interface
[8]
GSM 11.11：
Digital cellular telecommunications system (Phase 2+);
Specification of the Subscriber Identity Module – Mobile
Equipment (SIM – ME) interface
[9]
GSM 03.38：
Digital cellular telecommunications system (Phase 2+); Alphabets
and language-specific information
[10]
GSM 11.10
Digital cellular telecommunications system (Phase 2)； Mobile
Station (MS) conformance specification； Part 1： Conformance
specification
[11]
AN_Serial Port
AN_Serial Port

SIM Tech SIMCom SIM800C Specifications

General

Brand	SIM Tech
Model	SIMCom SIM800C
Category	Control Unit
Language	English