Sima DEL-32 - Transport

6
ENGLISH
The control panel of the DEL and COMBI TRONIC models differ slightly from the conventional DEL and COMBI
model (see image below).
The only difference is the operation mode selector, which can be placed on Manual or on Auto mode to make
the machine operate likewise.
4. TRANSPORT.
For a safe transport of the machine, please follow the following instructions:
The Bending and Combined machines are fitted with holes in the working table to be lifted with cranes through
chains or cables. The means of transport used must be safe.
IMPORTANT: During the transport of the machine, the latter should never be reversed nor be put on either
side. The machine is only to rest on its four feet.
1. INVERSE SWITCH.
2. OVERLOAD PROTECTION WARNING
LIGHT.
3. RETURN SWITCH.
4. ON LIGHT.
5. VOLTIMETER.
6. AMPERIMETER.
7. EMERGENCY STOP.
1. INVERSE SWITCH.
2. ALARM PILOT.
3. RETURN SWITCH.
4. OPERATION MODE SELECTOR.
5. VOLTIMETER.
6. AMPERIMETER.
7. EMERGENCY STOP.