Sime HOME PLUS - Holiday Function

23
EN
– Press the encoder
clic
k
to confirm the modification and
move to the next
“data/value” [2]
HEATING TIME PROGRAM
024681012141618202224
Day/s:
[1] 06:00 - 08:00
[2] 11:00 - 13:00
[3] -
[4] 18:00 - 23:00
MONDAY
Cancel Confirm
08:00
– Continue in this way until all the necessary modifications
have been made for each day of the week or group of days.
NB: The user must work in a CIRCULAR manner ("rounda-
bout") therefore, ALWAYS MOVING FORWARDS, even if a mis-
take has been made.
m
WARNING
If NO time band is required, the start and stop times
of that band must be set to the same value (eg. 3
14:00-14:00).
– Once the modification has been made, press the button
Confirm
to go back to “Single days” or “Group of days”
– Press the button
Esc
to go back to the “main screen” .
Th 21 Sept 2014Zone 10:30
Menu Mode
Hot water 48°C eco
Winter automatic - set 20.0°C until 7.30
4.3.2 Holiday function
This function allows the user to deactivate both heating and
hot water production during a
“set and activated” holiday pe-
riod during which the antifreeze function can be active (if set).
To set the holiday function from the
“main screen” :
– Press the button
Mode
.
– Press the encoder
clic
k
to confirm one of the function
modes,
Summer or Winter .
– Rotate the encoder
to select “Holiday function”
Es
cB
ack
Winter
Off
Summer
Hot water MAN 40°C
Holiday function OFF
Heating MAN 20.0°C
– Press the encoder
clic
k
to confirm “ Holiday function” and go
into the modifiable area
Cancel Confirm
HOLIDAY SCHEDULE
Hot water OFF - Heat. OFF (nofrost active)
DAY MONTH YEAR HOUR
Start: 05 02 2014 15 : 00
20 02 2014 15 : 00
Stop:
Enable holiday: NO
0
5
– Rotate the encoder to modify the “data/value” which
will be highlighted.