To Next PageTo Next Page
Need help?Do you have a question about the Simer 4807S and is the answer not in the manual?
General| Brand | Simer |
|---|---|
| Model | 4807S |
| Category | Water Pump |
| Language | English |
Contact information and page references for installation and operation support in English.
Key instructions to follow during installation, operation, and maintenance.
Specific warnings and guidelines for safe electrical connections and handling.
Practices for safe operation, maintenance, and work area management.
Details of the 12-month warranty, repair/replacement policy, and eligibility.
Conditions, exclusions, and limitations of the product warranty.
Instructions for removing an old pump and preparing for new installation.
Guide for installing the pump with a driven point system.
Instructions for installing the pump in a cased well.
Procedure for installing the pump for surface water sources, e.g., sprinklers.
Steps for connecting the pump to a pre-charged pressure tank.
Procedure for connecting the pump to a standard pressure tank.
How to adjust motor settings for dual voltage operation.
Instructions for changing the pump's voltage setting using plug or dial types.
Guidance on wiring connections and a chart for recommended wire and fuse sizes.
Step-by-step instructions to fill the pump and piping with water before starting.
Instructions on how to drain the pump and piping to prevent freeze damage.
