12
WARNING: The rules in local standards about electrical installations
shall be followed during product installation.
WARNING: Check for any damage on the appliance before installing it.
Do not have the appliance installed if it is damaged. Damaged products
cause a risk for your safety.
4.1. Important Warnings for Installation:
During operation of the oven, the cooling
fan shall move excess steam out and
prevent the appliance from overheating.
This is necessary for ensuring your
appliance to work well and to cook well.
The cooling fan continues to operate
after cooking is nished. After cooling
is complete, the fan shall automatically
turn off.
A clearance shall be left behind the compartment where you shall
place your appliance to ensure efcient and proper operation of your
appliance. This clearance shall not be neglected as it is necessary for
the operation of the ventilation system of the appliance.
4.2. Right Place For Installation
The appliance is designed so that it shall t commercially available
counters. A safe clearance shall be left between the product and kitchen
walls or furniture. Refer to the drawings on the installation section (see
pages 14-17) for suitable clearances. (dimensions are given in mm)
• Surfaces, synthetic laminates and adhesives used shall be resistant
to heat. (minimum 100°C).
• Kitchen cabinets shall be level with the appliance and xed.
• A rack shall be placed between the oven and the shelf if there is
a shelf under the oven.
WARNING: Do not install the appliance beside refrigerators or coolers.
Heat radiated by the appliance increases the energy consumption of
cooling devices.
Figure 1
GB
To Next Page
Loading...
