18
5. ELECTRICAL CONNECTION AND SAFETY
This oven shall be correctly installed and connected by the authorized
service and according to the manufacturer’s instructions.
The appliance shall be installed in an oven housing which provides
high ventilation.
The electrical connections of the appliance shall be made only by
using grounded sockets equipped with a grounding system laid in
accordance with the instructions. If the place where the appliance shall
be installed is not designed for a grounded system, immediately contact
an authorized service. The manufacturer shall never be responsible for
damages caused by non-grounded sockets, to which the appliance has
been plugged.
Your oven’s plug is grounded; make sure that the outlet you shall
connect the plug is grounded, too. The plug shall be placed so that it
can be accessed after installation.
Your oven is manufactured as compatible with the 220-240 V 50/60
Hz. AC power supply and requires a fuse of 16 Amp. If your power
network does not provide these specications, contact an electrician
or an authorized service.
When you need to replace the fuse, please make sure that the
electrical connection is as follows:
• Brown wire to the phase (live end)
• Blue wire to neutral
• Yellow-green wire to ground terminal
The circuit breaker switches of the oven shall be placed so that end
user can reach them when the oven is installed.
The power supply cord (the cord with plug) shall not contact the hot
parts of the appliance.
If the power supply cord (the cord with plug) is damaged, this cord
shall be replaced by the manufacturer or its service agent or an equally
qualied personnel to prevent a hazardous situation.
6. CONTROL PANEL
Function Button
Digital Timer
Thermostat
GB
To Next Page
Loading...
