13
WARNING: Do not use the door and/or handle to carry or move the
appliance.
4.3. Installation and Assembly of the Oven
Operating space of the appliance shall be determined before starting
the installation.
Appliance shall not be installed on areas with high ow of air.
Handle the appliance with two persons at least. Do not drag the
appliance to prevent damage to the ground.
Remove all transportation materials inside and outside of the
packaging. Remove all materials and documents inside the product.
4.4. Installation Under Counter
Cabinet shall conform with dimensions specied in Fig. 2.
A clearance with the dimensions specied in the gure shall be
ensured at the rear compartment of the cabinet to provide the required
ventilation.
After installation, the clearance that shall be left between the bottom
of the counter and the top of the appliance is indicated by “A” in Fig.
5. This is for ventilation and
it shall not be closed.
4.5. Installation In a High Cabinet
The cabinet shall comply with the dimensions given in Fig. 4.
In the rear part of the cabin, and at the top and bottom, clearances
with the dimensions specied in the gure shall be ensured to provide
the required ventilation.
4.6. Installation Conditions
The dimensions of the appliance are given in gure 3.
The furniture surfaces to be installed and the installation materials to
be used shall resist a temperature of at least 100 °C.
To prevent the appliance from turning over, the cabinet to be installed
shall be fixed and the cabinet floor shall be level.
The floor of the cabinet shall be strong enough to withstand a load of
at least 60 kg.
GB
To Next Page
Loading...
