22
8.4. Operation of the Chicken Roast*
Spit whole chicken to the skewer. To ensure
a healthy grill, center and secure the chicken
with the xing hooks on each side of the
skewer. Place the skewer on the chicken
roast wire and slide it inside the oven, and
make sure that the end of the skewer is
seated on the chicken roast motor housing.
Before closing the oven door, do not forget
to remove the plastic handle from the skewer
by rotating it. After closing the door, bring the oven to the grill mode
and adjust the thermostat temperature to the maximum temperature
level. During the cooking process, place a tray on the bottom to collect
the dripping grease. After grilling, place the plastic handle by rotating
it and remove it from the oven. Add some water to the tray for ease of
cleaning.
8.5. Operation of the Timer
Figure 9
Back Button
Menu Switching / Conrmation
Next Key
GB
To Next Page
Loading...
